SunGlo Dog Collar, Center Ring, 1 1/2" Wide
by SunGlo Item #: 1031210-M
Be the first to review this item
Wide Orange SunGlo Collar for Spirited Dogs$16.95
FREE Nameplate with This CollarA B C D E F G H I J K L M
N 0 P Q R S T U V W X Y Z
! @ # $ % & * ( ) + - = \ { } | ' , . / : < > ?
1 2 3 4 5 6 7 8 9 0
If No Nameplate is chosen the pre-drilled nameplate holes are visible.
N 0 P Q R S T U V W X Y Z
! @ # $ % & * ( ) + - = \ { } | ' , . / : < > ?
1 2 3 4 5 6 7 8 9 0
If perhaps you have a spirited dog and need something more to hold onto or a little more orange will help differentiate your dog from its surroundings we have the collar for you. The 1 1/2" Orange SunGlo Collar in Center Ring Style is wide and all business. At 1 1/2" wide and orange all the way around, this SunGlo Collar in Center Ring Style will keep your good dog in sight and give you more than enough to hold onto when it's time for some one on one attention.
This collar comes with a FREE personalized solid brass nameplate attached. For your consideration, DOGS Unlimited has a stainless steel nameplate option which will go very nicely with the collar's nickel hardware. Solid brass or stainless steel, your choice. As always our brass nameplates come with either brass swat rivets or machine stamped solid brass rivets while the stainless steel nameplates will come with nickel plated swat rivets or machine stamped nickel plated steel rivets.
A word about our rivet options:
We offer two styles of rivets to attach our nameplates - SWAT Rivets and Machine Stamped Rivets.
SWAT Rivets are free and a nice option for dogs that are pets whose collars do not get pulled or tugged. They are a thin metal rivet and are swatted with a hammer to attach the nameplate to the collar. Because they are made of thin metal they are easy to drill out if you need to change out the nameplate with a new, updated nameplate. But they are also easily popped off if the collar gets tugged on or pulled on.
Machine Stamped Rivets are a tubular rivet post and cap set and the same style rivet that's used when making the collar. It's a very strong rivet and takes a rivet machine to attach the cap to the post. They are a much more permanent rivet when it comes to attaching the nameplate and are great for working dogs and dogs whose collar will be pulled and tugged.
- VERY IMPORTANT INFORMATION ABOUT COLLAR SIZING -
We measure our collars from the end of the buckle to the middle of 5 holes NOT the entire length of the collar, so when we say that a collar has a NECK SIZE of 15" long this length is the distance between the buckle and the middle hole. Ultimately this measurement is based on your dog's Neck Size.
With that in mind, the best way to get a collar that fits properly is to put a string around your dog's neck where the collar will lay, and where it meets, cut it off and measure it. If you have a tailor's tape, you can do the same measurement and read the tape where it meets. That is the figure we will need to send you a collar that fits your dog correctly.
This collar comes with a FREE personalized solid brass nameplate attached. For your consideration, DOGS Unlimited has a stainless steel nameplate option which will go very nicely with the collar's nickel hardware. Solid brass or stainless steel, your choice. As always our brass nameplates come with either brass swat rivets or machine stamped solid brass rivets while the stainless steel nameplates will come with nickel plated swat rivets or machine stamped nickel plated steel rivets.
A word about our rivet options:
We offer two styles of rivets to attach our nameplates - SWAT Rivets and Machine Stamped Rivets.
SWAT Rivets are free and a nice option for dogs that are pets whose collars do not get pulled or tugged. They are a thin metal rivet and are swatted with a hammer to attach the nameplate to the collar. Because they are made of thin metal they are easy to drill out if you need to change out the nameplate with a new, updated nameplate. But they are also easily popped off if the collar gets tugged on or pulled on.
Machine Stamped Rivets are a tubular rivet post and cap set and the same style rivet that's used when making the collar. It's a very strong rivet and takes a rivet machine to attach the cap to the post. They are a much more permanent rivet when it comes to attaching the nameplate and are great for working dogs and dogs whose collar will be pulled and tugged.
- VERY IMPORTANT INFORMATION ABOUT COLLAR SIZING -
We measure our collars from the end of the buckle to the middle of 5 holes NOT the entire length of the collar, so when we say that a collar has a NECK SIZE of 15" long this length is the distance between the buckle and the middle hole. Ultimately this measurement is based on your dog's Neck Size.
With that in mind, the best way to get a collar that fits properly is to put a string around your dog's neck where the collar will lay, and where it meets, cut it off and measure it. If you have a tailor's tape, you can do the same measurement and read the tape where it meets. That is the figure we will need to send you a collar that fits your dog correctly.
SunGlo Dog Collar, Center Ring, 1 1/2" Wide Q&A
What is the width of the SunGlo Dog Collar?
The SunGlo Dog Collar is 1 1/2" wide.
What color is the SunGlo Dog Collar?
The SunGlo Dog Collar is orange.
What is the style of the collar?
The collar features a Center Ring style.
What are the nameplate options available?
The collar comes with a FREE personalized solid brass nameplate or an optional stainless steel nameplate from DOGS Unlimited.
What type of hardware does the collar have?
The collar features nickel hardware.
What are the rivet options?
There are SWAT Rivets and Machine Stamped Rivets available for attaching the nameplate.
What is the benefit of Machine Stamped Rivets?
Machine Stamped Rivets are strong and suitable for collars that get tugged or pulled on.
What is the advantage of SWAT Rivets?
SWAT Rivets are a free option and suitable for pets whose collars do not experience tugging or pulling. They are easy to drill out if you need to update the nameplate.
Can I choose between brass or stainless steel?
Yes, you can choose between solid brass or stainless steel for the nameplate.
Is the SunGlo Dog Collar suitable for active dogs?
Yes, the collar is designed for spirited dogs and provides enhanced visibility and secure handling.
Item Specifications
| Product Name | SunGlo Dog Collar, Center Ring, 1 1/2" Wide |
| Suitable for | Spirited dog or need differentiation from surroundings |
| Color | Orange |
| Width | 1 1/2" |
| Nameplate Material Options | Solid brass or stainless steel |
| Rivet Options | SWAT Rivets (thin metal, easily removed, suitable for pets) or Machine Stamped Rivets (tubular, strong, more permanent, suitable for working dogs and those whose collar will be pulled and tugged) |
| Free Personalization | Yes, with a brass nameplate attached |
| Stainless Steel Nameplate Availability | Offered by DOGS Unlimited, goes well with the collar's nickel hardware |
| Nameplate Rivet Types | Brass nameplates come with either brass swat rivets or machine stamped solid brass rivets; Stainless steel nameplates come with nickel plated swat rivets or machine stamped nickel plated steel rivets |
| Collar Sizing | Measured from the end of the buckle to the middle of 5 holes; Based on dog's Neck Size; For proper fit, put a string around the dog's neck where the collar would go, adjust the string so that you can comfortably slip two fingers under the string, and measure the string |
SunGlo Center Ring Dog Collar - Keep Your Spirited Dog Visible and Secure
Introducing the durable and high-visibility 1 1/2" Orange SunGlo Collar in Center Ring Style, specifically designed for spirited dogs. With this wide collar, you'll have more to hold onto during one-on-one attention moments, ensuring your precious companion stays secure and in sight.
Featuring a FREE personalized solid brass nameplate attached, this collar comes with a DOGS Unlimited stainless steel nameplate option as well. Match the collar's nickel hardware and choose between solid brass or stainless steel to suit your preference.
No need to worry about nameplate attachment, as we offer both SWAT Rivets and Machine Stamped Rivets. Decide on the type of rivet based on your dog's lifestyle, whether they are a playful pet or an active adventurer exposed to tugging and pulling.
