SunGlo Dog Collar, Standard, 2" Wide
by SunGlo Item #: 1031205-M
Be the first to review this item
Experience Ultimate Visibility with SunGlo Dog Collar$19.95
FREE Nameplate with This CollarA B C D E F G H I J K L M
N 0 P Q R S T U V W X Y Z
! @ # $ % & * ( ) + - = \ { } | ' , . / : < > ?
1 2 3 4 5 6 7 8 9 0
If No Nameplate is chosen the pre-drilled nameplate holes are visible.
N 0 P Q R S T U V W X Y Z
! @ # $ % & * ( ) + - = \ { } | ' , . / : < > ?
1 2 3 4 5 6 7 8 9 0
And now for something on the extreme side...
A 2" wide dog collar! Even in the heaviest of cover your hunting dog will be visible with this 2" wide SunGlo Collar in Standard Style. And as if that wasn't enough the 2" D-ring will give you plenty of room when you want to clip your dog onto a lead.
This collar comes with a FREE personalized solid brass nameplate attached. For your consideration, DOGS Unlimited has a stainless steel nameplate option which will go very nicely with the collar's nickel hardware. Solid brass or stainless steel, your choice. As always our brass nameplates come with either brass swat rivets or machine stamped solid brass rivets while the stainless steel nameplates will come with nickel plated swat rivets or machine stamped nickel plated steel rivets.
A word about our rivet options:
We offer two styles of rivets to attach our nameplates - SWAT Rivets and Machine Stamped Rivets.
SWAT Rivets are free and a nice option for dogs that are pets whose collars do not get pulled or tugged. They are a thin metal rivet and are swatted with a hammer to attach the nameplate to the collar. Because they are made of thin metal they are easy to drill out if you need to change out the nameplate with a new, updated nameplate. But they are also easily popped off if the collar gets tugged on or pulled on.
Machine Stamped Rivets are a tubular rivet post and cap set and the same style rivet that's used when making the collar. It's a very strong rivet and actually takes a rivet machine to attach the cap to the post. They are a much more permanent rivet when it comes to attaching the nameplate and great for working dogs and dogs whose collar will be pulled and tugged.
- VERY IMPORTANT INFORMATION ABOUT COLLAR SIZING -
We measure our collars from the end of the buckle to the middle of 5 holes NOT the entire length of the collar, so when we say that a collar has a NECK SIZE of 15" long this length is the distance between the buckle and the middle hole. Ultimately this measurement is based on your dog's Neck Size.
With that in mind, the best way to get a collar that fits properly is to put a string around your dog's neck where the collar will lay, and where it meets, cut it off and measure it. If you have a tailor's tape, you can do the same measurement and read the tape where it meets. That is the figure we will need to send you a collar that fits your dog correctly.
A 2" wide dog collar! Even in the heaviest of cover your hunting dog will be visible with this 2" wide SunGlo Collar in Standard Style. And as if that wasn't enough the 2" D-ring will give you plenty of room when you want to clip your dog onto a lead.
This collar comes with a FREE personalized solid brass nameplate attached. For your consideration, DOGS Unlimited has a stainless steel nameplate option which will go very nicely with the collar's nickel hardware. Solid brass or stainless steel, your choice. As always our brass nameplates come with either brass swat rivets or machine stamped solid brass rivets while the stainless steel nameplates will come with nickel plated swat rivets or machine stamped nickel plated steel rivets.
A word about our rivet options:
We offer two styles of rivets to attach our nameplates - SWAT Rivets and Machine Stamped Rivets.
SWAT Rivets are free and a nice option for dogs that are pets whose collars do not get pulled or tugged. They are a thin metal rivet and are swatted with a hammer to attach the nameplate to the collar. Because they are made of thin metal they are easy to drill out if you need to change out the nameplate with a new, updated nameplate. But they are also easily popped off if the collar gets tugged on or pulled on.
Machine Stamped Rivets are a tubular rivet post and cap set and the same style rivet that's used when making the collar. It's a very strong rivet and actually takes a rivet machine to attach the cap to the post. They are a much more permanent rivet when it comes to attaching the nameplate and great for working dogs and dogs whose collar will be pulled and tugged.
- VERY IMPORTANT INFORMATION ABOUT COLLAR SIZING -
We measure our collars from the end of the buckle to the middle of 5 holes NOT the entire length of the collar, so when we say that a collar has a NECK SIZE of 15" long this length is the distance between the buckle and the middle hole. Ultimately this measurement is based on your dog's Neck Size.
With that in mind, the best way to get a collar that fits properly is to put a string around your dog's neck where the collar will lay, and where it meets, cut it off and measure it. If you have a tailor's tape, you can do the same measurement and read the tape where it meets. That is the figure we will need to send you a collar that fits your dog correctly.
SunGlo Dog Collar, Standard, 2" Wide Q&A
What is the width of the SunGlo Dog Collar?
The SunGlo Dog Collar is 2 inches wide.
What hardware options are available with the SunGlo Dog Collar?
The collar comes with nickel hardware and a brass or stainless steel nameplate.
What type of rivets are available for attaching the nameplate?
There are two options: SWAT Rivets and Machine Stamped Rivets.
Is the nameplate on the collar personalized?
Yes, the collar comes with a FREE personalized brass nameplate.
Can I use the SunGlo Collar for my hunting dog?
Yes, the extreme visibility makes it perfect for hunting dogs.
Is the D-ring on the collar large enough for easy lead attachment?
Yes, the 2" D-ring allows for ample room to attach a lead.
Which type of rivet is best for a pet dog's collar?
SWAT Rivets are a good option for pet dogs.
Which type of rivet is best for a working dog's collar?
Machine Stamped Rivets are more durable and suitable for working dogs.
Are the rivets easy to change if needed?
SWAT Rivets are easy to drill out, while Machine Stamped Rivets are more permanent.
What is the advantage of the SunGlo Dog Collar's 2" width?
The 2" width provides ultimate visibility even in heavy cover.
Item Specifications
| Brand | SunGlo |
| Style | Standard |
| Width | 2" Wide |
| Visibility | High visibility in heavy cover |
| D-ring | 2" size; provides space for clipping dog onto a lead |
| Nameplate | FREE personalized solid brass nameplate attached |
| Nameplate option | Stainless steel option available; choice of solid brass or stainless steel |
| Rivet options | SWAT Rivets (free, thin metal) or Machine Stamped Rivets (strong, tubular) |
| Collar sizing | Measured from end of buckle to middle of 5 holes,-not the entire length |
| Fitting method | Use a string or tailor's tape to measure dog's neck size |
| Hardware | Nickel hardware |
SunGlo 2" Wide Collar for Hunting Dogs - Maximum Visibility and Durability
Introducing the SunGlo Dog Collar, specifically designed in a Standard Style with a 2" width to provide the ultimate visibility even in heavy cover. No need to worry when clipping your dog onto a lead, as the 2" D-ring allows for ample room to maneuver.
The SunGlo Collar comes with a FREE personalized brass nameplate attached, adding a touch of individuality to your dog's collar. DOGS Unlimited also offers a stainless steel nameplate option, which perfectly complements the nickel hardware of the collar. The choice is yours.
Our nameplates come with two different rivet options: SWAT Rivets and Machine Stamped Rivets. SWAT Rivets are a great option for pet dogs, while Machine Stamped Rivets provide a more permanent and durable option for working dogs.
