Big Easy Dog Door, X-Large
by Gun Dog House Door Company Item #: 1127031-10001
Be the first to review this item
$199.99
In stock
This Item Ships Directly from the Manufacturer
Made for the big dogs!!!
As your dog goes in or out through the pet door, the inner clear 1/4" acrylic chew-proof dog door panel swings freely on its' hinge to allow easy access. Close tolerances mean less air infiltration than other free-swinging pet doors.
The Big Easy Pet Door is recommended for dogs that are timid, arthritic, or old. Also, if you need a silent operating dog door.
For weather-tight or colder climates consider the Heavy Duty Dog Door.
DIMENSIONS -
Dog Door Frame Size: 18" x 26"
Dog Door Opening Size: 15" x 23"
ITEM SPECIFICATIONS -
* Door: ΒΌβ Clear Acrylic Chew-Proof Panel
* Hinges: 1 Free Swing Door Hinge
* Closure: Weighted closure to self shut
Easy Installation:
*Only four screws to install (included)
*Rough Opening required: 16-1/2β x 25-1/2β (Note: if you're using the Gun Dog House Door Trim Kit, you must follow that recommended opening size of 17-1/4" x 26-1/4")
Where to create the Opening:
*Measure the distance from the ground to the lowest part of the dog's chest
*Subtract 2"
*This is where the opening will start and go up 25-1/2" from that spot OR determine the height off the ground given a 25-1/2" opening where your dog will not have to duck down or jump over to use the door.
As your dog goes in or out through the pet door, the inner clear 1/4" acrylic chew-proof dog door panel swings freely on its' hinge to allow easy access. Close tolerances mean less air infiltration than other free-swinging pet doors.
The Big Easy Pet Door is recommended for dogs that are timid, arthritic, or old. Also, if you need a silent operating dog door.
For weather-tight or colder climates consider the Heavy Duty Dog Door.
DIMENSIONS -
Dog Door Frame Size: 18" x 26"
Dog Door Opening Size: 15" x 23"
ITEM SPECIFICATIONS -
* Door: ΒΌβ Clear Acrylic Chew-Proof Panel
* Hinges: 1 Free Swing Door Hinge
* Closure: Weighted closure to self shut
Easy Installation:
*Only four screws to install (included)
*Rough Opening required: 16-1/2β x 25-1/2β (Note: if you're using the Gun Dog House Door Trim Kit, you must follow that recommended opening size of 17-1/4" x 26-1/4")
Where to create the Opening:
*Measure the distance from the ground to the lowest part of the dog's chest
*Subtract 2"
*This is where the opening will start and go up 25-1/2" from that spot OR determine the height off the ground given a 25-1/2" opening where your dog will not have to duck down or jump over to use the door.
- Chew proof
- Free-swinging design
- Weather protection
- Easy to install