These Filson Single Tin Chaps in Husky size offer tough, water-repellent oil finish Tin Cloth that protects against briars and wet brush. Adjustable side straps provide a no-twist fit.
Flat felled seams, bar tacking at stress points, double-needle construction ensure reliable use for years.
RESIDENTS OF CALIFORNIA - Proposition 65 Warning
- ADDITIONAL INFO
- CLEANING INFO
*Adjustable side straps for snug, no-twist fit
*Made with water-repellent, abrasion-resistant fabric
*Felled seams with bar tacking for added durability
*Made in the USA with imported materials
* Single Tin HUSKY Style Chaps are 2" larger in the thighs than the non-husky version
If your normal pant inseam is 29" - 31", then order size Regular.
If your normal pant inseam is 32" - 34", then order size Long.
Thigh Circumference - approximately 26"
Fabric - Oil Finish Tin Cloth, 15 oz. 100% cotton duck, 2 ply by 2 ply, paraffin treated for maximum water repellency
Weight - Approximately 1 lb 10 oz
Common Uses - Upland hunting, waterfowl hunting, horseback riding, ranching, rugged outdoor wear
How do I clean my Oil Finish Tin Cloth garment?
Wipe or brush away surface soil or buildup with a damp cloth or scrub brush. If necessary, use cold water to loosen up any caked mud or dirt, or just hose 'em down at the end of the day.
Filson advises against spot cleaning with soap and water, as it may result in a loss of water repellency or color in that spot. If it is absolutely necessary to spot clean an Oil Finish garment, you may need to re-wax that spot to restore the water repellency after it dries.
DO NOT professionally dry clean Oil Finish garments. Dry cleaning solutions destroy the Oil Finish, effectively turning Oil Finish fabrics into Dry Finish fabrics. If an Oil Finish garment is dry cleaned, it will need to be re-waxed to restore its water repellency.
DO NOT machine wash Oil Finish garments. Machine washing breaks down the Oil Finish, and sometimes causes the fabric to shrink. Most importantly, machine washing will not soften Oil Finish Tin Cloth. In fact, it may make the fabric stiffer than before.
Do I need to re-wax my Oil Finish Tin Cloth garment right away?
You shouldn't need to re-wax your Oil Finish Tin Cloth garment right away. It is ready to wear.
However, over time, and with regular use, the Oil Finish water repellency may weaken, especially in areas of high wear or repeated flexing (such as the knees of a pant, or the elbows or cuffs on a jacket).
What should I do if my Oil Finish Tin Cloth garment gets wet?
Cotton can shrink if it gets wet, especially when it's exposed to any kind of heat. Allow your Oil Finish Tin Cloth garment to dry naturally, away from any source of heat, to minimize shrinkage.
Oil Finish Tin Cloth is made of 100% cotton that has not been preshrunk, so shrinkage can occur, even if care is taken to avoid prolonged exposure to heat when wet. Most customers do not experience enough shrinkage to have a problem with the fit.
Filson, Single Tin Chaps, Husky is found in the following departments
IMPORTANT - Only 1 of each selected item below will be added to your basket. If you would like to order a higher quantity please go to the item's product page. Also, please uncheck the Add to Basket Box after you have clicked on the Select Options box.
About Filson Corporation
Filson, a leading outfitter for outdoor enthusiasts, is committed to providing the highest quality apparel that stands up to the toughest conditions.
Filson puts the same care into all our products that C.C. Filson insisted on since 1897. We believe that no one can craft our heavy wools, rugged cottons, and genuine bridle leather with the same quality and durability that we can get right here in Seattle. Whether you're active in drenching rain, brush and briars, or severe cold and snow.